Installation Guide

by Boyd / Hoverup

Installation of this upgrade is best accomplished by removing the forward servo module on your T-Rex. Only four small self-tapping screws need to be removed to accomplish this. Once the servo module is removed from the main chassis, it is recommended that you remove the two servos before proceeding. Using the RC Hover aluminum platform as a guide, carefully drill 3 holes, using a .060" diameter drill bit, into the bottom of the servo module. Reinstall the servos in the module. Attach the RC Hover platform to the bottom of the servo module using the supplied self-tapping screws. Remount the servo module to the chassis. The underside of your RC Hover platform is now ready to serve as a battery mount and also has adequate space above to mount your receiver and gyro if you choose. Use rubber bands to attach the battery pack to the bottom of the platform.