Details:
SPECIFICATION

Operating voltage: DC 11~18 volts
AC 100~240V, 50/60Hz

Charge/discharge power: max. 50/5 Watts

NiCd/MH: 1~15 cells

LiIo/LiPo/LiFe: 1~6 series

Pb: 2~20V

Charge current: 0.1 to 5.0A

Discharg current: 0.1 to 1.0A

No. of cycle: 1 to 5 times

Battery data memory: up to 5 data

Weight: 1000g

Dimension: 160x120x40 mm

USER'S SETTING-UP PARAMETERS

Lithium battery voltage type: LiIo:3.6V, LiPo:3.7V, LiFe:3.3V

NiCd Delta-peak voltage sensitivity: 1 to 20mV

NiMH Delta-peak voltage sensitivity: 1 to 20mV

Battery temperature cut-off: 20 to 80C or OFF

Waste time between charge/discharge: 1 to 60 min.

Integral timer limit for safety: 10 to 720 min.or OFF

Maximum charging capacity limit for safety: 10 to 9990mAh or OFF

Key beep and buzzer sound: ON/OFF

Input DC power low alert: 10 to 11V

- Optimized operating software
When charging or discharging, BC6 has an 'AUTO' function that sets the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communication for every possible error so it introduces a maximum safety. These can be set at users option.

- Dual input power
BC6 employs the circuit that can be operated with the input power of AC(Alternating Current) or DC(Direct Current). For AC input, it contains a AC-DC switching power supplier which has 5A of power capacity and maximum output power of 50Watts for charging. As a result it can charge up to 16 cells of NiCd/NiMH and 6 series of Lithium batteries with maximum current of 5.0A.

- Individual voltage balancer for Lithium batteries inside

BC6 has an individual-cell-voltage balancer inside. So it does not need any balancer separately when charging Lithium batteries (LiIo/LiPo/LiFe) for cell voltage balancing.